banner
banner

28 Mar 2024, 15:14 [ UTC - 5; DST ]


Concorde Battery (banner)



Reply to topic  [ 631 posts ]  Go to page Previous  1 ... 23, 24, 25, 26, 27, 28, 29 ... 43  Next
Username Protected Message
 Post subject: Re: Flying the Skywagon
PostPosted: 03 Mar 2021, 20:37 
Offline


User avatar
 Profile




Joined: 11/25/11
Posts: 9168
Post Likes: +17159
Location: KGNF, Grenada, MS
Aircraft: Baron, 180,195,J-3
I took my first real xc today in Psycho Billy since the install of the new engine. Went to other side of Little Rock to look at a truck crane I need. NO DOUBT, I'm making more horsepower than with the old engine. What a perfect day for flying as well. The panel pic let's you see what Psycho Billy can do now at 65%. Pretty good for an old straight leg Cessna. The other pic is as I was crossing the Mississippi River with Grenada Lake in the far distance.

Jg


Please login or Register for a free account via the link in the red bar above to download files.

_________________
Waste no time with fools. They have nothing to lose.


Top

 Post subject: Re: Flying the Skywagon
PostPosted: 04 Mar 2021, 07:41 
Offline


User avatar
 Profile




Joined: 05/11/10
Posts: 12364
Post Likes: +11351
Location: Indiana
Aircraft: Cessna 185, RV-7
That’s pretty impressive stuff. Any cooling issues?


Top

 Post subject: Re: Flying the Skywagon
PostPosted: 04 Mar 2021, 08:29 
Offline


User avatar
 Profile




Joined: 11/25/11
Posts: 9168
Post Likes: +17159
Location: KGNF, Grenada, MS
Aircraft: Baron, 180,195,J-3
Stuart,

It seems not. Yesterday morning it was about 40F when I departed KGNF. I had the cowl flaps closed and #4 reached 400F climbing at 95 mph. With cowl flaps half open, it came down below 380. With my old engine, outside OAT's didn't seem to make much difference and flying with cowl flaps half open doesn't make 2 mph difference in speed.

As you can see on the EDM, cruise temps of the three highest cylinders is 360 or so.

I pushed her up to 75% and got 171 still burning under 14 gph, but I never fly anything over 65%.

To be completely honest, my steam gauge AI shows about 3-4 mph slower indicated than the Aspen and the truth may be between those indications. Still, even 160 mph at 65% in a 180 is really nice.

This airplane is a delight to fly and does so straight and true. For which, I will give credit to Del Lehman and his shop. I have one option that most don't even know was an option on a 180: rudder trim. It had been bypassed many years ago and "jury-rigged" for no rudder trim. Del realized this, found the necessary parts, and put the airplane back to original configuration.

Jg

_________________
Waste no time with fools. They have nothing to lose.


Top

 Post subject: Re: Flying the Skywagon
PostPosted: 04 Mar 2021, 12:29 
Offline


User avatar
 Profile




Joined: 09/23/09
Posts: 11841
Post Likes: +10440
Location: Cascade, Idaho (U70)
Aircraft: 182
Username Protected wrote:
Stuart,

It seems not. Yesterday morning it was about 40F when I departed KGNF. I had the cowl flaps closed and #4 reached 400F climbing at 95 mph. With cowl flaps half open, it came down below 380. With my old engine, outside OAT's didn't seem to make much difference and flying with cowl flaps half open doesn't make 2 mph difference in speed.

As you can see on the EDM, cruise temps of the three highest cylinders is 360 or so.

I pushed her up to 75% and got 171 still burning under 14 gph, but I never fly anything over 65%.

To be completely honest, my steam gauge AI shows about 3-4 mph slower indicated than the Aspen and the truth may be between those indications. Still, even 160 mph at 65% in a 180 is really nice.

This airplane is a delight to fly and does so straight and true. For which, I will give credit to Del Lehman and his shop. I have one option that most don't even know was an option on a 180: rudder trim. It had been bypassed many years ago and "jury-rigged" for no rudder trim. Del realized this, found the necessary parts, and put the airplane back to original configuration.

Jg


Oh man..... I use rudder trim quite a bit on my 61 182D. I wonder why somebody would not want it. You can always leave it in one position if that floats your boat.
160 mph? Well done.

_________________
Life is for living
Backcountry videos: https://www.youtube.com/channel/UCSChxm ... fOnWwngH1w


Top

 Post subject: Re: Flying the Skywagon
PostPosted: 05 Mar 2021, 00:06 
Offline


User avatar
 Profile




Joined: 04/04/12
Posts: 2382
Post Likes: +556
Location: O32 Central Cali.
Aircraft: C150
Nice tin can[color=#000040]JGG
[/color]


Top

 Post subject: Re: Flying the Skywagon
PostPosted: 05 Mar 2021, 07:40 
Offline


User avatar
 Profile




Joined: 05/11/10
Posts: 12364
Post Likes: +11351
Location: Indiana
Aircraft: Cessna 185, RV-7
Is something up with the Bushwheel Bill tail cone kit? McFarlane recently contracted to sell it, but the page for it has become unavailable.


Top

 Post subject: Re: Flying the Skywagon
PostPosted: 05 Mar 2021, 09:47 
Online



User avatar
 Profile




Joined: 07/22/14
Posts: 9192
Post Likes: +16337
Company: Mountain Airframe LLC
Location: Mena, Arkansas
Username Protected wrote:
Stuart,

It seems not. Yesterday morning it was about 40F when I departed KGNF. I had the cowl flaps closed and #4 reached 400F climbing at 95 mph. With cowl flaps half open, it came down below 380. With my old engine, outside OAT's didn't seem to make much difference and flying with cowl flaps half open doesn't make 2 mph difference in speed.

As you can see on the EDM, cruise temps of the three highest cylinders is 360 or so.

I pushed her up to 75% and got 171 still burning under 14 gph, but I never fly anything over 65%.

To be completely honest, my steam gauge AI shows about 3-4 mph slower indicated than the Aspen and the truth may be between those indications. Still, even 160 mph at 65% in a 180 is really nice.

This airplane is a delight to fly and does so straight and true. For which, I will give credit to Del Lehman and his shop. I have one option that most don't even know was an option on a 180: rudder trim. It had been bypassed many years ago and "jury-rigged" for no rudder trim. Del realized this, found the necessary parts, and put the airplane back to original configuration.

Jg

That's awesome, Johnny. Really good to hear this.


Top

 Post subject: Re: Flying the Skywagon
PostPosted: 05 Mar 2021, 22:13 
Offline


 Profile




Joined: 12/29/12
Posts: 654
Post Likes: +256
Username Protected wrote:
I took my first real xc today in Psycho Billy since the install of the new engine. Went to other side of Little Rock to look at a truck crane I need. NO DOUBT, I'm making more horsepower than with the old engine. What a perfect day for flying as well. The panel pic let's you see what Psycho Billy can do now at 65%. Pretty good for an old straight leg Cessna. The other pic is as I was crossing the Mississippi River with Grenada Lake in the far distance.

Jg



John,

What engine did you put in?

Rgs
Patrick


Top

 Post subject: Re: Flying the Skywagon
PostPosted: 05 Mar 2021, 22:24 
Offline


User avatar
 Profile




Joined: 11/25/11
Posts: 9168
Post Likes: +17159
Location: KGNF, Grenada, MS
Aircraft: Baron, 180,195,J-3
Patrick,

It is a Continental "rebuild" purchased through Airpower. I asked, and received, for the proper term for my engine and here it is, straight from Continental.


"The proper term is actually Factory-Rebuild (neither factory uses the term “reman” actually, and it is definitely not an overhaul. An overhaul is something done in the field, and can be done to serviceable limits, not necessarily new limits. The Rebuilt engine, which only Continental can offer (anything else is an overhaul), must be built to brand-new limits/specs. The term Rebuilt is specifically for an engine direct from the manufacturer, to factory-new specs, that is why only it is a true zero-time (no history) engine, with a brand-new serial number (the FAA doesn’t allow overhaul shops to do that)."

They build when you order and mine took just under 90 days to be shipped. They gave me full credit for my old core even though it wasn't going to pass anything. I don't know if they still have that incentive or not.

Jg

_________________
Waste no time with fools. They have nothing to lose.


Top

 Post subject: Re: Flying the Skywagon
PostPosted: 05 Mar 2021, 22:32 
Offline



 Profile




Joined: 01/24/10
Posts: 6730
Post Likes: +4406
Location: Concord , CA (KCCR)
Aircraft: 1967 Baron B55
CMI does overhauls at there Fairhope facility. You can ship your old engine there and they will rebuild it. It will then be a factory overhaul but not zero time.


Top

 Post subject: Re: Flying the Skywagon
PostPosted: 05 Mar 2021, 22:42 
Offline


User avatar
 Profile




Joined: 11/25/11
Posts: 9168
Post Likes: +17159
Location: KGNF, Grenada, MS
Aircraft: Baron, 180,195,J-3
Username Protected wrote:
CMI does overhauls at there Fairhope facility. You can ship your old engine there and they will rebuild it. It will then be a factory overhaul but not zero time.


Stan Musick had his Skyland engine done there and was very happy. I probably would have taken the same route had it not been for the full core credit policy.

Jg

_________________
Waste no time with fools. They have nothing to lose.


Top

 Post subject: Re: Flying the Skywagon
PostPosted: 05 Mar 2021, 22:50 
Offline


User avatar
 Profile




Joined: 11/25/16
Posts: 1819
Post Likes: +1382
Location: 2IS
Aircraft: C501
Username Protected wrote:
...I have one option that most don't even know was an option on a 180: rudder trim. It had been bypassed many years ago and "jury-rigged" for no rudder trim. Del realized this, found the necessary parts, and put the airplane back to original configuration.

Jg

That's awesome.


Top

 Post subject: Re: Flying the Skywagon
PostPosted: 05 Mar 2021, 23:02 
Offline


 Profile




Joined: 12/01/13
Posts: 825
Post Likes: +821
Location: Airdrie, AB
Aircraft: Cessna A185F
Username Protected wrote:
Oh man..... I use rudder trim quite a bit on my 61 182D. I wonder why somebody would not want it. You can always leave it in one position if that floats your boat.
160 mph? Well done.


The rudder trim includes a bungee. Remove the trim device and you reduce the foot pressure required to deflect the rudder. Light controls are are what some desire most in the early 180s. If your style is to go and play in crosswinds, slip the airplane into tight strips, and not spend much time in climb where sustained right rudder heats heavy, then deselecting the rudder trim option might be right for you.

Not an option in my 185.

The rudder trim was required for a particular float installation. I can’t remember which one. Yaw stability can become a factor on floats. The bungee holding the rudder steady improves yaw stability.


Top

 Post subject: Re: Flying the Skywagon
PostPosted: 06 Mar 2021, 01:43 
Offline


 Profile




Joined: 02/23/17
Posts: 630
Post Likes: +311
I added the rudder trim and love it.


Top

 Post subject: Re: Flying the Skywagon
PostPosted: 06 Mar 2021, 01:44 
Offline


 Profile




Joined: 02/23/17
Posts: 630
Post Likes: +311
Username Protected wrote:
Is something up with the Bushwheel Bill tail cone kit? McFarlane recently contracted to sell it, but the page for it has become unavailable.

Rumor has it there is some sort of paperwork (FAA?) issue. More details on BCP.


Top

Display posts from previous:  Sort by  
Reply to topic  [ 631 posts ]  Go to page Previous  1 ... 23, 24, 25, 26, 27, 28, 29 ... 43  Next




You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

Terms of Service | Forum FAQ | Contact Us

BeechTalk, LLC is the quintessential Beechcraft Owners & Pilots Group providing a forum for the discussion of technical, practical, and entertaining issues relating to all Beech aircraft. These include the Bonanza (both V-tail and straight-tail models), Baron, Debonair, Duke, Twin Bonanza, King Air, Sierra, Skipper, Sport, Sundowner, Musketeer, Travel Air, Starship, Queen Air, BeechJet, and Premier lines of airplanes, turboprops, and turbojets.

BeechTalk, LLC is not affiliated or endorsed by the Beechcraft Corporation, its subsidiaries, or affiliates. Beechcraft™, King Air™, and Travel Air™ are the registered trademarks of the Beechcraft Corporation.

Copyright© BeechTalk, LLC 2007-2024

.blackwell-85x50.png.
.MountainAirframe.jpg.
.Marsh.jpg.
.gallagher_85x50.jpg.
.pdi-85x50.jpg.
.boomerang-85x50-2023-12-17.png.
.aircraftassociates-85x50.png.
.daytona.jpg.
.sierratrax-85x50.png.
.wat-85x50.jpg.
.pure-medical-85x150.png.
.AAI.jpg.
.midwest2.jpg.
.jandsaviation-85x50.jpg.
.ABS-85x100.jpg.
.one-mile-up-85x100.png.
.cav-85x50.jpg.
.avionwealth-85x50.png.
.bullardaviation-85x50-2.jpg.
.saint-85x50.jpg.
.aeroled-85x50-2022-12-06.jpg.
.aviationdesigndouble.jpg.
.kingairacademy-85x100.png.
.traceaviation-85x150.png.
.avfab-85x50-2018-12-04.png.
.ei-85x150.jpg.
.temple-85x100-2015-02-23.jpg.
.tempest.jpg.
.SCA.jpg.
.Rocky-Mountain-Turbine-85x100.jpg.
.Wingman 85x50.png.
.jetacq-85x50.jpg.
.lucysaviation-85x50.png.
.Genesys_85x50.jpg.
.dbm.jpg.
.ssv-85x50-2023-12-17.jpg.
.aircraftferry-85x50.jpg.
.Wentworth_85x100.JPG.
.headsetsetc_Small_85x50.jpg.
.kadex-85x50.jpg.
.wilco-85x100.png.
.centex-85x50.jpg.
.stanmusikame-85x50.jpg.
.kingairnation-85x50.png.
.planelogix-85x100-2015-04-15.jpg.
.blackhawk-85x100-2019-09-25.jpg.
.camguard.jpg.
.bpt-85x50-2019-07-27.jpg.
.airmart-85x150.png.
.Latitude.jpg.
.chairmanaviation-85x50.jpg.
.concorde.jpg.
.shortnnumbers-85x100.png.
.tat-85x100.png.
.geebee-85x50.jpg.
.Foreflight_85x50_color.png.
.CiESVer2.jpg.