BeechTalk - BT

Username Protected · **Posted:** 08 Dec 2020, 09:15

Does anybody have experience replacing the door seals on their Cessna doors? What seal was used? bk

Username Protected · **Posted:** 08 Dec 2020, 17:54

I have three types

Early v type
Neo sponge

Working on early window

Later type
Grey silicone
Door and window

Inflatable
Grey silicone

Happy to mail sample

Username Protected · **Posted:** 09 Dec 2020, 21:41

I used the factory seals and they are good. They are mounted on the door.
I also tried ones that mount on the fuselage. Not so good.

Username Protected · **Posted:** 10 Dec 2020, 00:34

Guy, where are yours intended to be glued?

Username Protected · **Posted:** 10 Dec 2020, 01:13

400 series too?

Username Protected · **Posted:** 12 Jan 2021, 18:53

Username Protected wrote:

Does anybody have experience replacing the door seals on their Cessna doors? What seal was used? bk

For those who own P210s, the Bob Fields Inflatable Door Seal STC was just acquired by TALCO Aviation to add to their list of existing inflatable seal STCs. The P210 STC was just transferred over and now waiting on the FAA to add the seal to TALCO's PMA Supplement to make it official and PMA'd.

www.aerocessories.aero

Username Protected · **Posted:** 12 Jan 2021, 20:25

I have the P210 door seal made to sample from customer

There is a difference in who mfg the seal

Material etc

I have seen three mfg for the Tso holder

The question is , do you mfg in house and do you offer a lifetime warranty

Correct cement included ?

I have done the 300/400 and they design was based on the Lancair 4

Username Protected · **Posted:** 12 Jan 2021, 20:27

The original seal was cement to the door

A true inflatable design sits in a channel

Username Protected · **Posted:** 22 Jan 2021, 21:27

I replaced the seals on my T210 with the seals from Knots 2U. They work very well.

Cessna Door Seals