banner
banner

29 Mar 2024, 06:53 [ UTC - 5; DST ]


Concorde Battery (banner)



Reply to topic  [ 13 posts ] 
Username Protected Message
 Post subject: Cessna Wheel Pants
PostPosted: 10 Jan 2019, 12:43 
Offline


User avatar
 Profile




Joined: 03/29/15
Posts: 98
Post Likes: +57
Location: Springfield, MO (18MO)
Aircraft: E33
I have a set of main (2) wheel pants. I bought them a while back thinking they would fit my 172E. They didn’t. They are white, gel coated, I believe and are in beautiful shape. How do I find the model they will fit and how much would a pristine set of main wheel pants be worth?


Top

 Post subject: Re: Cessna Wheel Pants
PostPosted: 10 Jan 2019, 13:12 
Offline



User avatar
 Profile




Joined: 02/03/11
Posts: 9023
Post Likes: +2502
Company: Gee Bee Aeroproducts
Aircraft: hang glider
There are after market and used

Try the Cessna parts catalog on google search

Salvage yards

eBay

You will need correct back plate and hardware to install on gear


Top

 Post subject: Re: Cessna Wheel Pants
PostPosted: 13 Jan 2019, 13:59 
Offline


User avatar
 Profile




Joined: 11/25/11
Posts: 9168
Post Likes: +17159
Location: KGNF, Grenada, MS
Aircraft: Baron, 180,195,J-3
I bought a set of Knots2u wheel fenders for $2380 for my Cessna 180. The mounting brackets,not included, are $3200 new. :bugeye: you are going to have to know what they fit and what accessories will be required for installation.

Jg

_________________
Waste no time with fools. They have nothing to lose.


Top

 Post subject: Re: Cessna Wheel Pants
PostPosted: 14 Jan 2019, 21:26 
Offline


 Profile




Joined: 03/07/11
Posts: 55
Post Likes: +17
Show them to old salt IA. Send me pics too aerocare.aero@gmail.com


Top

 Post subject: Re: Cessna Wheel Pants
PostPosted: 15 Jan 2019, 11:34 
Offline


User avatar
 Profile




Joined: 02/06/18
Posts: 1074
Post Likes: +1154
Aircraft: Piper PA-32R 300
If you find that they fit a C-150K, I might be a buyer but I am a tightwad! I've been watching E-bay and have bid on a few pairs.


Ron

_________________
Ron

"It rubs the lotion on it's skin"


Top

 Post subject: Re: Cessna Wheel Pants
PostPosted: 15 Jan 2019, 21:01 
Offline


User avatar
 Profile




Joined: 11/25/11
Posts: 9168
Post Likes: +17159
Location: KGNF, Grenada, MS
Aircraft: Baron, 180,195,J-3
Username Protected wrote:
I have a set of main (2) wheel pants. I bought them a while back thinking they would fit my 172E. They didn’t. They are white, gel coated, I believe and are in beautiful shape. How do I find the model they will fit and how much would a pristine set of main wheel pants be worth?


Keith,

The more I think about this, the more confused I get. Wheel pants are wheel pants, designed to fit a particular size of tire. The only variable is the way they have to mount up considering the gear strut and brake arrangement. Del Lehman actually had to move my calipers from back to front to make the ones for my 180 fit. The correct mounting plate is the key as I understand it. Those pants/fenders will probably fit any Cessna as long as the tires are not too big.

I have rebuilt and refitted fenders on both of the Decathlons I owned. At the time, the fenders were about $500 a pair but fragile as hell. I rebuilt them both with an epoxy resin liner and strengthened the mounting locations. The only limitation I can see would be the opening for the wheels/tires.

Jg

_________________
Waste no time with fools. They have nothing to lose.


Top

 Post subject: Re: Cessna Wheel Pants
PostPosted: 16 Jan 2019, 13:40 
Offline


 Profile




Joined: 02/23/17
Posts: 630
Post Likes: +311
The angle needs to be right. 180s are 12 deg different from 172s, 182s. I am guessing the locations of the mounting nutplates on the mounting plate determine the angle. But, the nutplate pattern also needs to match the hole pattern on the wheel pant.


Top

 Post subject: Re: Cessna Wheel Pants
PostPosted: 16 Jan 2019, 19:44 
Offline


User avatar
 Profile




Joined: 11/25/11
Posts: 9168
Post Likes: +17159
Location: KGNF, Grenada, MS
Aircraft: Baron, 180,195,J-3
Jeff,

True, but with epoxy resin, cloth and thin metal reinforcement, you can put the nut plates anywhere. I have worked extensively with West System epoxies over the years with boats. They make different additives for different applications. I once, as an experiment, embedded a 3/8" bolt in a 2 oz cup of resin with additives. The next day, I set it on a concrete floor and hit it with a 10# sledge hammer. The head of the bolt flattened and a piece broke out of the concrete, but the shaft of the bolt never moved in the dollop of resin.

Trust me, inserting nut plates where needed is no challenge.

Jg

_________________
Waste no time with fools. They have nothing to lose.


Top

 Post subject: Re: Cessna Wheel Pants
PostPosted: 16 Jan 2019, 20:46 
Offline


 Profile




Joined: 02/23/17
Posts: 630
Post Likes: +311
Let us know what you figure out, John. I have early style 172/182 (pointy) wheelpants, but I had to custom make the wheel pant brackets to correct for the 12 deg. I recently scored a set of the factory 1980s 180/185 brackets, but the nut plates are in different locations. I would like to re-use the same wheel pants, so those holes need to match. Note that there is also a metal doubler inside the wheel pant.


Top

 Post subject: Re: Cessna Wheel Pants
PostPosted: 17 Jan 2019, 10:13 
Offline


User avatar
 Profile




Joined: 11/25/11
Posts: 9168
Post Likes: +17159
Location: KGNF, Grenada, MS
Aircraft: Baron, 180,195,J-3
Username Protected wrote:
I have a set of main (2) wheel pants. I bought them a while back thinking they would fit my 172E. They didn’t. They are white, gel coated, I believe and are in beautiful shape. How do I find the model they will fit and how much would a pristine set of main wheel pants be worth?


Keith,

I am just sharing my experience and knowledge of the capability of the resins and how I have used them with wheel pants before. I have no need for anymore wheel pants. My point is that if you have the correct metal mounting brackets for the airplane, modifying the wheel pants to fit is not an issue.

I would suggest you post them with pictures and exact dimensions. Take a shot with them sitting on top of the Cessna tires to give a perspective for the buyer.

You asked: My opinion of their value is $500 for the pair.

Jg

_________________
Waste no time with fools. They have nothing to lose.


Top

 Post subject: Re: Cessna Wheel Pants
PostPosted: 17 Jan 2019, 10:16 
Offline


User avatar
 Profile




Joined: 11/25/11
Posts: 9168
Post Likes: +17159
Location: KGNF, Grenada, MS
Aircraft: Baron, 180,195,J-3
Here is the picture of the Knots2U being fitted on my 180 last week.

Jg


Please login or Register for a free account via the link in the red bar above to download files.

_________________
Waste no time with fools. They have nothing to lose.


Top

 Post subject: Re: Cessna Wheel Pants
PostPosted: 17 Jan 2019, 13:46 
Offline



User avatar
 Profile




Joined: 02/03/11
Posts: 9023
Post Likes: +2502
Company: Gee Bee Aeroproducts
Aircraft: hang glider
Hah'

Thats more than a charge for a complete set of carbon fiber baffle and seals for the TTX

.60 thick
bumper chafe seals
ams3320.062 die cut baffle seals

Doing this since 1995

:shrug:


Please login or Register for a free account via the link in the red bar above to download files.


Top

 Post subject: Re: Cessna Wheel Pants
PostPosted: 17 Jan 2019, 19:39 
Offline


User avatar
 Profile




Joined: 11/25/11
Posts: 9168
Post Likes: +17159
Location: KGNF, Grenada, MS
Aircraft: Baron, 180,195,J-3
Damn Guy, that is pretty. Shame it has to be covered with a cowling. :bugeye:

Jg

_________________
Waste no time with fools. They have nothing to lose.


Top

Display posts from previous:  Sort by  
Reply to topic  [ 13 posts ] 




You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

Terms of Service | Forum FAQ | Contact Us

BeechTalk, LLC is the quintessential Beechcraft Owners & Pilots Group providing a forum for the discussion of technical, practical, and entertaining issues relating to all Beech aircraft. These include the Bonanza (both V-tail and straight-tail models), Baron, Debonair, Duke, Twin Bonanza, King Air, Sierra, Skipper, Sport, Sundowner, Musketeer, Travel Air, Starship, Queen Air, BeechJet, and Premier lines of airplanes, turboprops, and turbojets.

BeechTalk, LLC is not affiliated or endorsed by the Beechcraft Corporation, its subsidiaries, or affiliates. Beechcraft™, King Air™, and Travel Air™ are the registered trademarks of the Beechcraft Corporation.

Copyright© BeechTalk, LLC 2007-2024

.gallagher_85x50.jpg.
.planelogix-85x100-2015-04-15.jpg.
.aircraftassociates-85x50.png.
.AAI.jpg.
.chairmanaviation-85x50.jpg.
.daytona.jpg.
.Marsh.jpg.
.kadex-85x50.jpg.
.sierratrax-85x50.png.
.Wentworth_85x100.JPG.
.tat-85x100.png.
.jandsaviation-85x50.jpg.
.tempest.jpg.
.Wingman 85x50.png.
.kingairacademy-85x100.png.
.MountainAirframe.jpg.
.bullardaviation-85x50-2.jpg.
.headsetsetc_Small_85x50.jpg.
.jetacq-85x50.jpg.
.bpt-85x50-2019-07-27.jpg.
.airmart-85x150.png.
.one-mile-up-85x100.png.
.dbm.jpg.
.Genesys_85x50.jpg.
.lucysaviation-85x50.png.
.SCA.jpg.
.pdi-85x50.jpg.
.Latitude.jpg.
.centex-85x50.jpg.
.pure-medical-85x150.png.
.camguard.jpg.
.CiESVer2.jpg.
.ssv-85x50-2023-12-17.jpg.
.ei-85x150.jpg.
.avionwealth-85x50.png.
.geebee-85x50.jpg.
.temple-85x100-2015-02-23.jpg.
.wilco-85x100.png.
.Rocky-Mountain-Turbine-85x100.jpg.
.ABS-85x100.jpg.
.aviationdesigndouble.jpg.
.traceaviation-85x150.png.
.blackhawk-85x100-2019-09-25.jpg.
.avfab-85x50-2018-12-04.png.
.shortnnumbers-85x100.png.
.blackwell-85x50.png.
.midwest2.jpg.
.saint-85x50.jpg.
.Foreflight_85x50_color.png.
.concorde.jpg.
.wat-85x50.jpg.
.boomerang-85x50-2023-12-17.png.
.aeroled-85x50-2022-12-06.jpg.
.stanmusikame-85x50.jpg.
.aircraftferry-85x50.jpg.
.cav-85x50.jpg.
.kingairnation-85x50.png.