BeechTalk - BT

Username Protected · **Posted:** 13 Dec 2025, 15:52

I'm selling a set of GFC500 servo brackets for a 4 servo install that fits the following models: S35, V35, V35A, and V35B. The kits includes the brackets, cable clamps, servo plates, cable assemblies dsub connector kits, and a trim switch. Everything is new except for the brackets themselves. I do have a copy on the install manual if you need to reference anything.The only thing you need to supply is GSA28 servos to mount on the brackets.

Asking $4500 including shipping with CONUS.

- K11-00024-12, Kit 12, 2 Servo
- K11-00024-13, Kit 13, Pitch Trim Servo
- K11-00024-14, Kit 14, Yaw Damper Servo

Full List of Parts
Roll Servo
- 115-02900-00 - Aft roll bracket
- 115-02901-00 - Forward roll bracket
- 233-20072-00 - Bridle cable 101 (Roll)
- 115-02757-00 - GSA28 Plate
- 011-02951-10 - GSA 28 capstan kit, 1/16" spiral, 5 groove
- 011-04755-00 - Sub-assy, connector kit, GSA 28 (Dsub connector kit)

Pitch Servo
- 115-02902-00 - Pitch/Yaw bracket 1
- 115-02903-00 - Pitch/Yaw bracket 2
- 233-20073-00 - Bridle cable 102 (Pitch)
- 115-02910-00 - Roller bracket
- 147-00139-00 - Roller 2 (roller assembly)
- 115-02757-00 - GSA28 Plate
- 011-02951-10 - GSA 28 capstan kit, 1/16" spiral, 5 groove
- 011-04755-00 - Sub-assy, connector kit, GSA 28 (Dsub connector kit)

Yaw Servo
Yaw Bracket is shared with the pitch servo
- 233-20074-00 - Bridle cable 103 (Yaw)
- 115-02757-00 - GSA28 Plate
- 011-02951-10 - GSA 28 capstan kit, 1/16" spiral, 5 groove
- 011-04755-00 - Sub-assy, connector kit, GSA 28 (Dsub connector kit)

Pitch Trim Servo
- 115-02904-00 - Pitch trim bracket 1
- 115-02905-00 - Pitch trim bracket 2
- 233-20075-00 - Cable extension 104 (pitch trim)
- 011-02951-11 - GSA 28, continuous travel kit
- 011-04755-00 - Sub-assy, connector kit, GSA 28 (Dsub connector kit)

Username Protected · **Posted:** 13 Dec 2025, 23:38

I have GSA28 servos and the GMA507 controller if someone wants to put the kit together.
Derek

Username Protected · **Posted:** 15 Dec 2025, 15:29

$5000 OBO

Username Protected · **Posted:** 15 Dec 2025, 19:51

I have the GFC500 installed with roll and pitch on my G5. I would be interested in adding Yaw if the price was right and Mr. Boxwell could help me out with the servo needed.

Username Protected · **Posted:** 15 Dec 2025, 20:54

Username Protected wrote:

I have the GFC500 installed with roll and pitch on my G5. I would be interested in adding Yaw if the price was right and Mr. Boxwell could help me out with the servo needed.

These are airframe specific brackets for S/P/V35 Bonanzas. You’d need an entirely different kit for an F33A.

Username Protected · **Posted:** 16 Dec 2025, 14:23

Derek, How much for servos and controller

Username Protected · **Posted:** 21 Dec 2025, 07:35

Reduced to $4500, or make me an offer

Username Protected · **Posted:** 21 Dec 2025, 10:09

Josh,

The three kit part numbers you referenced in the beginning of your description are not for the S and V models.

The kit P/N -90, -69, and -14 are for the C-M 35 models.

That being said Kit P/N -69 and -14 are also compatible with the N and P 35 Bonanzas, but also require kit P/N -68 instead of the -90

The S and V35/A/B models use kit P/N -12, -13, and -14

Username Protected · **Posted:** 21 Dec 2025, 11:25

Username Protected wrote:

Josh,

The three kit part numbers you referenced in the beginning of your description are not for the S and V models.

The kit P/N -90, -69, and -14 are for the C-M 35 models.

That being said Kit P/N -69 and -14 are also compatible with the N and P 35 Bonanzas, but also require kit P/N -68 instead of the -90

The S and V35/A/B models use kit P/N -12, -13, and -14

You are correct! Thanks for the flag. I had 2 sets of brackets and looked at the wrong invoice!

FS: GFC500 Brackets and Install Kit