We are sponsor of BeechTalk and provide new Inogen G5 units for pilots. The Inogen G5 can produce up to 6LPM and can run on AC or DC. Our pilot package includes the unit, one 8 cell battery, carrying case, ac/dc chargers, 2- cannula's, Y splitter, Pulse Ox, Manual, shipping, and 5-year warranty for $1795. Below is a link if you would like more info or you can message me with any questions.

Pure Medical
828-544-1178

[url]4753590.hs-sites.com/inogen-0[/url]

Update:
We have been asked by a couple of pilots what is the difference between the Inogen Rove 6 and the Inogen G5.

Inogen decided to private label the Rove 6 for European countries and for their direct-to-consumer business. The Rove 6 and G5 are the same unit just with a different label. If you look at the specs on a G5, nothing is different, including battery life and 1-6 settings. The G5 is still being produced, but mainly for their B2B businesses. We offer a 5-year factory warranty on the G5. I listed the specs below.

G5 Specs:
Specification Value
Weight

4.7 lbs (2.13 kg)
Height 8.15" (20.7 cm)
Width 7.19" (18.3 cm)
Depth
3.26" (8.28 cm)

Oxygen Flows Settings
1 to 6

Sound Level
38 dBA at setting 2

Power Up Time
2 minutes

Battery Run Time - 8 Cell Battery*

Up to 6 hours
Battery Run Time - 16 Cell Battery* Up to 13 hours
* Battery runtimes will vary from conditions like ambient temperature, humidity variations and usage, including breath rate, etc.

Rove 6 Specs:
Specification Value
Weight

4.7 lbs (2.13 kg)
Height 8.15" (20.7 cm)
Width 7.19" (18.3 cm)
Depth
3.26" (8.28 cm)

Oxygen Flows Settings
1 to 6

Sound Level
38 dBA at setting 2

Power Up Time
2 minutes

Battery Run Time - 8 Cell Battery*

Up to 6 hours
Battery Run Time - 16 Cell Battery* Up to 13 hours
* Battery runtimes will vary from conditions like ambient temperature, humidity variations and usage, including breath rate, etc.

On Inogen's website, you can see that under Rove 6 accessories, the G5 unit is still listed.

Hope this helps anyone looking to invest in a portable oxygen machine.

Thanks,

Jon Abbotts
Pure Medical
828-544-1178

Is this usable in lieu of bottled oxygen?

I've never heard of such a thing, but for the price, you've got my attention.

I have an Inogen that I got through a different company. Got rid of my bottles and MH o2d2 system once I learned about the Inogen line of products. I no longer have to deal with the pain of getting my bottles refilled (1h30m roundtrip) or the expense. Only downside is that unlike the bottles, the usable altitude is a bit lower. It's 18,000 feet for one person and I believe 14,500 for two. These days, I don't fly that high with two anyways so it's never been much a concern. I leave it plugged in to the cigarette lighter and it's fully charged all the time.

Yes it can replace the bottled o2 that you have. We always suggest having your bottle full just in case you need it. The Inogen unit will not fill tanks.

Yes it can replace the bottled o2 that you have. We always suggest having your bottle full just in case you need it, but then you don't have to keep filling up your bottles with the Inogen unit.

Sorry wasn’t trying to imply that you can fill your tank. The G5 can provide up to 6LPM for 6.5 hours at 1lpm. If the unit is plugged into ac or dc power it will charge and run 24/7.

I used an Inogen G5 today for the first time feeding two people at 15,000 MSL. My O2Sat stayed in the 90-93% range which is the same as I get with an O2D2. We did notice that there's a bit of an interaction with two people breathing on one G5 in that if one person took a breath shortly after the other, there was no flow to the second due to a minimum period between O2 pulses.

Lance,

What was the setting (number)?

We have used a unit serving two people up to 15,000, set to #5, 93% and 95%. In general we use 2 units when 14,000-17,500.

G.

If you want to fill your own bottle use a devillbiss ifill system with an adapter or use ifill tanks that have the pulse regulator already installed. Works great and is low enough in moisture that it won’t freeze up in the tank.

I have a couple of the PreciseFlight PulseOx devices. I wonder if those could be set up in such a way as to be a workaround the out of sync pulsing?

My guess is your Precise Flight mechanical pulse delivery devices require something like 100 PSI of continuous O2 in order to work properly. I think it might be possible to design an electronic control with pressure sensors and solenoid valves to deliver the bolus to only the person who is breathing in at the time (maybe when I've got nothing better to do). Maybe just a very sensitive "flip-flop" mechanical valve would suffice.