I'm excited to announce that Gallagher Aviation is now an authorized LockNLube reseller.

We only stock and sell products we use or have used, and endorse, so this is one of them! If you participate in owner assisted annual inspections on your Beechcraft like I do, have you had the joyous experience of greasing your landing gear? Ever take your grease gun, hook up to the zerk, and watch the grease go everywhere but into the zerk?

A LockNLube Grease Coupler fixes that! I didn't believe it until my buddy introduced it to me, and what was a lengthy and frustrating experience wasting grease turned into a quick exercise during annual.

I carry the standard LockNLube Grease Coupler, the extended Grease Coupler (XL), which is handy to get to the zerks in the main gear assembly, LockNFlate Air Chucks for filling your tires, a digital inflator, and more. I will continue to add more in the future too.

Here is the link:

https://www.gallagheraviationllc.com/Lo ... c_223.html <-- Link to LockNLube Products
https://www.gallagheraviationllc.com/Lo ... p_388.html <-- Link to LockNLube Grease Coupler - $29.99
https://www.gallagheraviationllc.com/Lo ... p_389.html <-- Link to LockNLube Grease Coupler XL - $39.99
https://www.gallagheraviationllc.com/Lo ... p_390.html <-- LockNLube Inflator with Digital Gauge Kit - $139.99
https://www.gallagheraviationllc.com/Lo ... p_391.html <-- LockNFlate Air Chuck Closed Flow
https://www.gallagheraviationllc.com/Lo ... p_407.html <-- LockNLube Push-On 90 Degree Grease Coupler Adapter.


gallagheraviationllc@gmail.com <-- Email me
1-833-425-5288 <-- Call, please leave a voicemail if I do not answer
513-401-6495 <-- Call/Text/MMS, please leave a voicemail if I do not answer

[youtube]http://youtu.be/gRAb4IT6ugQ[/youtube]

The only thing worse than grease all over is a landing gear zerk breaking off trying to disconnect the grease gun.
I've been using the locknlube fitting for a few years at work also to grease machines and it is a great tool.

I'm a big fan of LockNLube products.

I've bought and thrown away countless tire inflators. The LockNFlate is the winner. I have 3 and l love them! It makes checking tire pressure on the Bonanza SO much easier.

May I recommend you stock the narrow needle grease adapter (LNL122). This works great on a few of the gear zerks that the standard coupler won't fit on.

Another one that gets used on the gear in a couple places is the 90 deg adapter (LNL121).

A good grease gun is a necessity. I'm pretty sure I use the Alemite 555E. It's excellent and I recommend that.

You should consider putting together a package that has the best stuff to grease Bonanza / Baron gear.

Anyway you look at it, it's nice to see you added this to your lineup

Thanks Tate, I was definitely looking at the 90 degree adapter. There is a zerk on my nose gear where it is really needed so that is a no brainer. I'll also add the narrow needle adapter too.

I appreciate the feedback.

Thanks Tate, I was definitely looking at the 90 degree adapter. There is a zerk on my nose gear where it is really needed so that is a no brainer. I'll also add the narrow needle adapter too.

I appreciate the feedback.

I have several of these grease and air fitting ends shipping out today and have an excellent inventory of all items listed in my online store.

https://www.gallagheraviationllc.com/Lo ... c_223.html <-- Link to website.

I've put in an order to add these. Thank you for the suggestion Tate!

Okay I added the 90 degree fitting, the needle nose extension, and a new tire inflator gauge. All in stock and ready to ship.

https://www.gallagheraviationllc.com/Lo ... c_223.html

I shipped out several of these grease gun fittings along with some of the air inflator tools. They are essential hangar tools, especially the LockNLube fittings.

The Grease Coupler XL is really handy for getting to a few of the zerks on the main gear attach points on the Bonanza and Baron. Just did it today and I am happy I had it.

https://www.gallagheraviationllc.com/Lo ... p_389.html <-- Website link to the Grease Coupler XL

Is there a needle adapter also for the flush style grease fittings I think they’re a 516?

Yes, I have a needle adapter.

https://www.gallagheraviationllc.com/Lo ... p_408.html

I now have a lever and pistol action grease gun available.

https://www.gallagheraviationllc.com/Lo ... p_439.html <-- Link to the lever action gun

https://www.gallagheraviationllc.com/Lo ... p_440.html <-- Link to the pistol action gun

I have all of these tools and fittings in stock and ready to ship. If you are working on your landing gear, these are must-have tools to make the job more efficient.

https://www.gallagheraviationllc.com/Lo ... c_223.html <-- Link to website
gallagheraviationllc@gmail.com <-- Email me
1-833-425-5288 <-- Call me, please leave a voicemail if I do not answer
513-401-6495 <-- Call/Text/MMS, please leave a voicemail if I do not answer

Had that happen yesterday. Had the nose gear specialty bolt 35-825005-BSC (about 150 dollar bolt) that I had JUST INSTALLED and the zerk fitting snapped off as I removed the zerk fitting.