Hi James, I want a set for the Shaw fuel caps (4) on my Baron. Annual is coming up next month so it seems like a good project for me. My caps are not hard to open and do fit flush, but I think these will prevent wear on the caps as well as making them even easier to open and close.

Hi Sven,

Yes they will prevent wear from the plunger on the metal washer that is already there. Once they are worn, you have to replace them, which is challenging in and to itself because of the lack of support Parker provides for these fuel caps. The 4 washer kit is $187.

Hi James, just bought them online through your website.

Thanks Sven,

This will ship out today!

James

I have an excellent inventory of these Marsh Brothers washers in stock and ready to ship. They give your old fuel caps extra life by eliminating wear on the plunger and allowing for them to be more easily opened and secured. You will really like them!

https://www.gallagheraviationllc.com/products.html <-- Order kits here

I have a couple of these polymer washer kits shipping out today. They are an excellent preventative maintenance item for these fuel caps. Pair them with my fluorosilicone fuel cap o-ring kits to help rejuvenate your cap and prevent fuel contamination.

I bought these from James and installed them during my annual. Forget the price - they are WORTH IT. The ease of opening and closing your fuel cap levers is ridiculous by comparison to the original design. So easy that I was concerned the fuel cap levers would stay closed during flight. Absolutely no problem and leak proof as well. Combine with the flourosilicone o-rings and you’ll have an unbeatable combination.

Work on 58P caps?

Thanks!

Yes but I do not have o-ring kits for the Shaw 457 fuel caps if that is the type cap you have. Snap a photo of the top and bottom and email it to me at gallagheraviationllc@gmail.com

I have more of these kits shipping out today. These are excellent kits for maintaining your fuel caps.

I have another kit shipping out. These are an excellent product to install when you are refreshing your Shaw or Gabb fuel caps. They prevent additional wear on the plunger handle from years of use with the metal OEM washer. Keep in mind, they do not manufacture replacement parts for these fuel caps - so once they are gone, they are gone.

https://www.gallagheraviationllc.com/products.html <-- order here

Marsh Brothers polymer washer kits can now be purchased on my new website at the link below. These are a must-have device to prevent continued wear of your handle plunger on the metal washer. They also greatly help opening and closing of the plunger handle. Miracle workers once you get them on.

www.gallagheraviationllc.com/Marsh-Brot ... _c_52.html <-- Weblink
1-833-425-5288 <-- Call me here
gallagheraviationllc@gmail.com <-- Email me here

I have an excellent inventory of these Marsh Brother's Aerotough GF polymer washer kits in stock. If you are in annual these are a must-have addition to our fluorosilicone fuel cap o-ring kits. Marsh Brother's proprietary polymer wears into the metal plunger handle to provide it self-lubricating properties and prevents additional metal wear from constant opening and closing when fueling. Gallagher Aviation has also added several other Marsh Brother's products to our store that are ready to ship today.

https://www.gallagheraviationllc.com/Ma ... _c_52.html <-- Link to website
1-833-425-5288 <-- Call me here
gallagheraviationllc@gmail.com <-- Email me here

Hi James, do the washer kits include the cotter pins needed for cap reassembly after washer install? Thanks.