BeechTalk - BT - FS: Post 84 new styl A36 electroluminescent Panel pilot side

Username Protected · **Posted:** 13 Nov 2019, 11:37

Hi, I have an electroluminescent (switch) panel from my 1992 A36 Bonanza for sale.
Its in great shape. No cracks. Worked when removed. Please see pics.
It was removed because I got the B&C standy Alternator that requires an additional switch. My panel was updated at the same time (GFC 600, G500TXi, etc...).
I didn’t want to cut the panel for that switch, so I got a new one from B&C (750$).
Asking price is 400$ OR BEST OFFER.
Plus shipping. Shipping to US should be less than 100 USD.
Part is based in Muelheim, Germany.
I have other parts available as well due to the panel-upgrade. The entire instrument-pressure (gyro) system was removed.
Thanks
Timm

Username Protected · **Posted:** 17 Nov 2019, 17:09

Username Protected · **Posted:** 29 Nov 2019, 05:59

Username Protected · **Posted:** 14 Dec 2019, 07:23

Username Protected · **Posted:** 03 Jan 2020, 10:15

Username Protected · **Posted:** 23 Apr 2020, 13:44

Interesting side note. When I installed my B&C standby alternator system, I sent my panel in to get re-marked for the B&C switch. I previously had the standby generator system, so I had a hole for the switch. It looks like you had the same hole.

Username Protected · **Posted:** 23 Apr 2020, 19:38

Ah ok, but did they change the lettering so it is visible in the dark?
Mine says now
STBY
ALT
On top of the swich. All else is gone.

The other hole is still there.
Its much brighter now compared to the other panels on the co-side.

Username Protected · **Posted:** 02 May 2020, 20:35

Username Protected wrote:

Ah ok, but did they change the lettering so it is visible in the dark?
Mine says now
STBY
ALT
On top of the swich. All else is gone.

The other hole is still there.
Its much brighter now compared to the other panels on the co-side.

Yes, Air Capitol Dial can re-mark/re-letter the panels. I sent them a drawing with the appropriate labeling required by the STC. I also just sent out the avionics circuit breaker panel to be updated. Most of the labels were wrong or were a sticky label not visible in the dark.

Username Protected · **Posted:** 04 May 2020, 06:16

Ah, that’s interesting. Didn’t know that. My co cb panel is like yours was but now they put a whole now plastic sheet nicely printed on for each cb. Looks nice, rather big lettering, so easy to see. Just not illuminated. I can live with it very well.
Unfortunately I live in Germany and I ordered the whole B&C kit in advance so I limited the down time of my Bo.
Got it all done as annual, avionics upgrade (GFC600, G5, GTX345, etc.) and other stuff at the same time. Was still almost 2 Months. I was on vacation for 3 weeks during the time, so the rest I could chase the guys in the shop and get parts to and from the paint shop, engraver, etc. Fun times...
If I had pulled the panels, ship to US and back would have taken too long probably.
Thanks
Timm

Username Protected · **Posted:** 26 Feb 2021, 10:04

Anyone in need of this panel?