BeechTalk - BT

Username Protected · **Posted:** 27 Apr 2019, 06:43

Batteryminder Airframe Interface Kit BM-AIK2

New, still in original package, $50 includes shipping SOLD

The BM-AIK2A is a parts kit to adapt aviation-specific BatteryMINDers for use with FAA-certified aircraft. Compatible with original, and new CEC1 series BatteryMINDer chargers. It may be installed by any certified mechanic. It does not require a Form 337 or FSDO field approval; all that is required is an entry in the maintenance logbook for return to service.

IMPORTANT:This harness is designed only for maintenance battery charging, not for supplying ground power for airframe operations. Disconnect the charger before turning on airframe electrical power. Reconnect the charger after turning airframe electrical power off to recharge and then maintain/disulfate the battery.

Username Protected · **Posted:** 27 Apr 2019, 10:45

I'll take it, cool. Sending you a PM.

Username Protected · **Posted:** 27 Apr 2019, 21:08

I will take it if still have it

Username Protected · **Posted:** 28 Apr 2019, 16:20

Username Protected wrote:

I will take it if still have it

Sold the item to Robert.

FS: Batteryminder Airframe Interface Kit