EI PT-30GA Pressure Transducer
I had this installed as a fuel pressure transducer, it was the default one that came from EI. It is accurate from ~0.5 to 30 psi. I needed something accurate down to 0.1 psi, so I ended up with a different type. This one was working when removed. Asking $75 shipped (sold at Spruce for $210)

EI PT-30ABS manifold pressure transducer
Also working when removed, the MP reading problem I had turned out to be config related and the probe is fine. Asking $75 shipped ($210 at Spruce).

Both probes were used for maybe an hour or two. If you want both, $125 shipped.

Added the 2nd transducer