I have to pieces of avionics I'm not going to end up using along with a couple other things (old style Beech yoke in crap condition I pirated for the trim microswitches and I was going to make some wall art and just don't have time, etc).
*** SPF *** The first is a fully functional King KI-204 Loc/GS head just back from servicing with a fresh 8130-3. You will notice there is some slight blistering on the instrument face behind the glass. This does not effect function and you have to be staring at it to notice. I didn't the first time I saw it with a group of avionics I purchased.
I'm going a different direction with my backup Nav/Com and don'd need it so I'll let it go for what I have in it which is $200 and $150 for the bench test and 8130. $375 shipped in a medium USPS Priority flat rate box and insured.
Second is a PS Engineering PMA-8000M C intercom that is new with only partial paperwork. I have the 8130 for this but not any of the mounting instructions, etc. We took it out of the bag to examine but otherwise haven't messed with it. $425 shipped Priority Insured.
Third: Beech yoke with a brand new emblem sticker off eBay. $30 plus shipping. I was going to fill this when I did the fiberglass compound for my car project then sand and have it powder coated with a new Beech emblem and cut most of the shaft off and put it on a shelf. I'll eventually do it if someone doesn't take it but otherwise it's for sale for what I paid for the sticker plus 10 bucks and whatever shipping costs. Kind of longer box and weirdly shaped, probably $25-30 1st class or UPS most states east of the Rockies.
4th: That e-225 early 35 electric prop switch I mentioned a month ago. Finally got to taking pictures. Showing some age on the back side that can be sanded and cleaned up but, most importantly, the switch itself is solid. Firm detents, no wobble, good springs for up/down prop activation. Those are the mounting clips in scotch tape. Extremely hard to find. $250 shipped.
Not looking for any trades at this time unless on the off chance someone has a Deklin (interface box for an Aspen for legacy autopilots) hanging around or a FAST wire harness for a KX-155 and a KI-209 and/or a GMA340 audio panel.
Thanks!
