BeechTalk - BT

Username Protected · **Posted:** 22 Mar 2013, 17:41

Username Protected wrote:

Joe, welcome to BT, very nice airplane, really like the latch mod, now I have to find out how much that will cost me(without the wife knowing) :whistle:

+1

Username Protected · **Posted:** 22 Mar 2013, 17:59

Great plane and great pics!

Welcome to BT. :bud:

-MO

Username Protected · **Posted:** 22 Mar 2013, 23:38

Nice job Joe, that's a awesome aircraft! Must be a rocket ship with that 550.

:cheers:

Username Protected · **Posted:** 24 Mar 2013, 09:16

Thanks for all the comments on the S-model; it is a very fun plane to fly.

Also, I found some infomation on the Cowl Latch Kit. The prior owner had mentioned a letter that was answered on Page 6 of the August 1989 ABS magazine that references a Beech Kit #35-9010M, of which only 30 were made. In the planes files, I found the installation instructions on a large plot CAD sheet about 8-10 feet long.

If someone needs these, I can send them out. I would just want them back.

Joe

Username Protected · **Posted:** 24 Mar 2013, 11:10

Username Protected wrote:

Thanks for all the comments on the S-model; it is a very fun plane to fly.

Also, I found some infomation on the Cowl Latch Kit. The prior owner had mentioned a letter that was answered on Page 6 of the August 1989 ABS magazine that references a Beech Kit #35-9010M, of which only 30 were made. In the planes files, I found the installation instructions on a large plot CAD sheet about 8-10 feet long.

If someone needs these, I can send them out. I would just want them back.

Joe

Joe, if someone does ask for the drawings, the easiest thing to do is take that drawing to a place that specializes in making blue print copies.
They can make one or more copies for you real cheap, no matter how large they are.
Home builders know where these places are. I bet there's one in Cedar Rapids.

Username Protected · **Posted:** 24 Mar 2013, 11:28

Hi joe,
Welcome.

Username Protected · **Posted:** 25 Mar 2013, 13:04

Welcome, Joe! Fellow "S" model owner here, and I LUST for a 550! Need to run this 520 out first, then thinking 550 or turbonormalized 520....haven't made decision yet. In any event, you'll love this forum and your new Bo. Congrats!

Mike

New Beech Owner