How To Load An Image To A Thread

There are two ways:

1) You can link to the picture that is hosted elsewhere on the internet; or
2) You can upload it to our servers and we will host it for you.

Option 1:
To link to a picture hosted elsewhere, just do the following:
When you are typing your post, you will see a row of editing buttons above the text window. The buttons, when pressed, will automatically insert the forum codes to complete the task. So,...

• When you come to the part of your post that you want the image to appear, just click the Img button, which will insert [img]and[/img] codes, keeping the cursor between them automatically.
• Just paste the URL (the address where the picture is located on the internet) between these two codes
• When you preview your post, you should see the image appear.

Option 2: To upload a picture to our servers:

• When you are posting a new topic or reply, there will be a section labeled 'Upload Attachment' below the window in which you are typing, click on Browse to navigate to the image file on your computer
• Click OK when you find it
• Click Add the file to upload the image (or Submit, if you're done with your message)
• Repeat for additional images, if necessary
• Click Submit when you are done with your post (if you haven't already)

NOTE: If the image is too large), then you will need to resize it using photoediting software or this handy site: http://www.shrinkpictures.com/ (very easy interface for quickly resizing pictures)